Skip to content

One of the system disks of beaubourg is out of order

One of the disks of the system raid of beaubourg is OO.

It's an hardware raid and reported by the raid card:

  • raid volume status:
megacli -LDInfo -Lall -aALL

Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name                :Virtual Disk 0
RAID Level          : Primary-1, Secondary-0, RAID Level Qualifier-0
Size                : 931.0 GB
Sector Size         : 512
Is VD emulated      : No
Mirror Data         : 931.0 GB
State               : Degraded                       <-----------------------------
Strip Size          : 512 KB
Number Of Drives    : 2
Span Depth          : 1
Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy   : Disk's Default
Encryption Type     : None
Default Power Savings Policy: Controller Defined
Current Power Savings Policy: None
Can spin up in 1 minute: Yes
LD has drives that support [T10](https://forge.softwareheritage.org/T10 'view original for T10 on Phabricator') power conditions: Yes
LD's IO profile supports MAX power savings with cached writes: No
Bad Blocks Exist: No
Is VD Cached: No

Exit Code: 0x00
  • disk status:
root@beaubourg:~# megacli -PDList -aALL 
...
Enclosure Device ID: 32
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: 1
Device Id: 1
WWN: 5000C5009772B3E0
Sequence Number: 3
Media Error Count: 38015                    <---------------------
Other Error Count: 75                           <---------------------
Predictive Failure Count: 156               <---------------------
Last Predictive Failure Event Seq Number: 6560499
PD Type: SAS

Raw Size: 931.512 GB [0x74706db0 Sectors]
Non Coerced Size: 931.012 GB [0x74606db0 Sectors]
Coerced Size: 931.0 GB [0x74600000 Sectors]
Sector Size:  512
Logical Sector Size:  512
Physical Sector Size:  512
Firmware state: Failed
Device Firmware Level: NS02
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x5000c5009772b3e2
SAS Address(1): 0x0
Connected Port Number: 0(path0) 
Inquiry Data: SEAGATE ST1000NX0453    NS02S470G630            
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 12.0Gb/s 
Link Speed: 12.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :27C (80.60 F)
PI Eligibility:  No 
Drive is formatted for PI information:  Yes 
PI: PI with type 2
Port-0 :
Port status: Active
Port's Linkspeed: 12.0Gb/s 
Port-1 :
Port status: Active
Port's Linkspeed: 12.0Gb/s 
Drive has flagged a S.M.A.R.T alert : Yes
...

Migrated from T3476 (view on Phabricator)